Vesper Demonstrates First Commercial Quiescent-Sensing MEMS Device for Consumer Products

Posted: June 22, 2016
VM1010 Proof-of-Concept Board for VM1010

VM1010 Proof-of-Concept Board demonstrates wake-on sound capability at nearly zero power for battery-powered consumer products

— Industry’s only wake-on sound microphone enables always on listening capability at practically zero power-draw

BOSTON – (June 22, 2016) – Vesper, developer of the world’s most advanced acoustic sensors, today demonstrated the first commercially available quiescent-sensing MEMS device, opening the possibility of acoustic event-detection devices at practically zero power draw. Drawing a scant 3 µA of current while in listening mode, Vesper’s newest piezoelectric MEMS microphone — VM1010 — will dramatically advance voice and acoustic event monitoring.

“Our quiescent-sensing MEMS microphone, VM1010, is the only device that uses sound energy itself to wake a system from full power-down,” said Matt Crowley, CEO, Vesper. “Even when fully powered-off, batteries in smartphones and smart speakers naturally dissipate 40-80uA, which is far more current than VM1010 needs. This means that there is no difference in battery-life for a system using VM1010 in listening mode and a fully powered-down conventional system.”

Even in sleep mode, VM1010 preserves its very high signal-to-noise ratio (SNR) — which is essential to improving acoustic range. In fact, there is absolutely no SNR penalty from going into low power, extending the distance of far field voice control in battery-powered systems.

“Once embedded in a voice-powered TV remote control or smart speaker, for example, VM1010 could allow you to turn on your device from across the room without having to push a button and without diminishing battery life,” added Crowley. “Like all Vesper microphones, VM1010 uses a rugged piezoelectric transducer that is immune to dust, water, oils, humidity, particles and other environmental contaminants, making it ideal for deployments outdoors or in kitchens and automobiles.”

“For years the electronics industry has envisioned the development of quiescent sensors that consume no power until the appropriate stimulus occurs, but no company has demonstrated this previously in a real commercial device,” said Peter Cooney, principal analyst and director, SAR Insight & Consulting. “Vesper’s latest piezoelectric MEMS microphone has the potential to advance quiescent sensing into the commercial realm, ushering in a new era of ubiquitous always on sensors that can run indefinitely on small batteries.”

Availability

VM1010 is a single-ended analog piezoelectric MEMS microphone. Engineering samples of VM1010 are available now to highly qualified customers developing technologically advanced systems. Production samples will be available in Q4 2016.

For sales inquiries, contact Vesper via email: sales@vespermems.com or visit Vesper on the web: www.vespermems.com.

About Vesper

Vesper is a privately held piezoelectric MEMS company based in Boston, MA. With origins at the University of Michigan, Vesper microphones improve the acoustic experience with a wide range of consumer products via a patented piezoelectric MEMS platform. These products include smartphones, smart speakers, Internet of Things (IoT) devices and connected automobiles. Vesper is funded by Accomplice, AAC Technologies, XinGang Electronics and other strategic partners. For more information about Vesper, please contact us via email: info@vespermems.com or web: www.vespermems.com.

The Vesper logo is a registered trademark of Vesper. All other product and company names are trademarks or registered trademarks of their respective holders.

-End-

Press Contacts:

Matt Crowley, Vesper

Email: crowley@vespermems.com

 

Maria Vetrano, Vetrano Communications

Email: maria@vetrano.com